ZyXEL Communications VSG1432-B101 Series User Manual

Chapter 15 Interface Group

VSG1432-B101 Series User’s Guide

In the following example, the client that sends packets with the DHCP Vendor ID 
option set to MSFT 5.0 (meaning it is a Windows 2000 DHCP client) is assigned the 
IP address 192.168.2.2 and uses the WAN VDSL_PoE/ppp0.1 interface.

Figure 88   Interface Grouping Application

Click Network Settings > Interface Group to open the following screen. 

Figure 89   Network Settings > Interface Group 

The following table describes the fields in this screen. 

Table 63   Network Settings > Interface Group

Add New 
Interface Group

Click this button to create a new interface group.

Group Name

This shows the descriptive name of the group.

WAN Interface

This shows the WAN interfaces in the group.

LAN Interfaces

This shows the LAN interfaces in the group.

DHCP Vendor IDs The ZyXEL Device automatically adds LAN hosts sending traffic with 

any of the Vendor Class Identifiers listed here to the interface group.

This field is blank if you do not have the ZyXEL Device automatically 
add clients to the interface group based on their Vendor Class 
Identifiers.

Modify

Click the Delete icon to remove the group.

Add

Click this button to create a new group.

Default: ETH 2~4

Internet

192.168.1.x/24

192.168.2.x/24

VDSL_PoE/ppp0.1

eth10.0

DHCP Vendor ID option: MSFT 5.0