ZyXEL Communications VSG1432-B101 Series User Manual

Chapter 22 Service Control

VSG1432-B101 Series User’s Guide

Click Security Settings > Service Control to open the following screen. 

Figure 124   Security Settings > Service Control 

The following table describes the fields in this screen. 

Table 94   Security Settings > Service Control 

General
#

This is the index number of the entry.

Services Name

This is the service you may use to access the ZyXEL Device.

LAN

Select the Enable check box for the corresponding services that you 
want to allow access to the ZyXEL Device from the LAN.

WAN

Select the Enable check box for the corresponding services that you 
want to allow access to the ZyXEL Device from the WAN.

Port

You may change the server port number for a service if needed, 
however you must use the same port number in order to use that 
service for remote management.

Certificate
HTTPS Certificate Select a certificate the HTTPS server (the ZyXEL Device) uses to 

authenticate itself to the HTTPS client. You must have certificates 
already configured in the Certificates screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to restore your previously saved settings.