ZyXEL Communications VSG1432-B101 Series User Manual

 Chapter 1 Introducing the VSG1432-B101

VSG1432-B101 Series User’s Guide

If you forget your password or cannot access the web configurator, you will need 
to use the RESET button at the back of the device to reload the factory-default 
configuration file. This means that you will lose all configurations that you had 
previously and the password will be reset to “1234”. 

Make sure the POWER LED is on (not blinking).

To set the device back to the factory default settings, press the RESET button for 
ten seconds or until the POWER LED begins to blink and then release it. When the 
POWER LED begins to blink, the defaults have been restored and the device 
restarts.

The ZyXEL Device is a wireless Access Point (AP) for wireless clients, such as 
notebook computers or PDAs and iPads. It allows them to connect to the Internet 
without having to rely on inconvenient Ethernet cables.

You can configure your wireless network in either the built-in Web Configurator, or 
using the WPS button.

Figure 6   Wireless Access Example

If the wireless network is turned off, press the WLAN/WPS button on the front of 
the ZyXEL Device for one second. Once the WLAN/WPS LED turns green, the 
wireless network is active.

You can also use the WLAN/WPS button to quickly set up a secure wireless 
connection between the ZyXEL Device and a WPS-compatible client by adding one 
device at a time.