ZyXEL Communications VSG1432-B101 Series User Manual

 Chapter 6 Broadband

VSG1432-B101 Series User’s Guide

Use this screen to change your ZyXEL Device’s Internet access settings. Click 
Network Settings> Broadband from the menu. The summary table shows you 
the configured WAN services (connections) on the ZyXEL Device.

Figure 19   Network Settings > Broadband 

The following table describes the labels in this screen. 

Table 6   Network Settings > Broadband

Add new WAN 
interface

Click this button to create a new connection.

#

This is the index number of the entry.

Status

This is the status of the connection.

Name

This is the service name of the connection.

Type

This shows whether it is a VDSL, ADSL, or Ethernet connection.

Encapsulation

This is the method of encapsulation used by this connection. 

VLAN

This is the Virtual LAN (VLAN) number configured for this WAN 
connection. 

VPI/VCI

This is the Virtual Path Identifier (VPI) and Virtual Channel Identifier 
(VCI) numbers configured for this WAN connection. 

ATM QoS

This is the type of ATM QoS of the connection.

IGMP Proxy

This shows whether the ZyXEL Device act as an IGMP proxy on this 
connection.

NAT

This shows whether NAT is activated or not for this connection. 

Default Gateway

This shows whether the ZyXEL Device use the WAN interface of this 
connection as the system default gateway.

Modify

Click the Edit icon to configure the WAN connection.

Click the Delete icon to remove the WAN connection.