ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Chapter 6 WAN

P-2302HWUDL-P1 Series User’s Guide

Each field is described in the following table.

Use this screen to set up an Ethernet connection using Roadrunner service with the ISP. To 
access this screen, click Network > WAN > Internet Connection.

Table 44   Network > WAN > Internet Connection (Ethernet)

ISP Parameters 

for Internet 

Access

Encapsulation

Select Ethernet. Ethernet encapsulation with Service Type set to Standard is 

typically used if you are extending your existing network.

Service Type

Select Standard.

WAN IP Address 

Assignment

Get automatically 

from ISP

Select this if your ISP did not assign you a static IP address or if you want another 

DHCP server to assign an IP address to the ZyXEL Device.

Use Fixed IP 

Address

Select this if your ISP assigned you a static IP address.

IP Address

Enter the IP address provided by your ISP.

IP Subnet Mask

Enter the subnet mask provided by your ISP.

Gateway IP 

Address

Enter the gateway provided by your ISP. If your ISP did not provide one, leave it 

blank.

WAN MAC 

Address

Spoof WAN MAC 

Address

Select this if you do not want to use the default MAC address for the ZyXEL 

Device.

Clone the 

computer’s MAC 

address - IP 

Address

This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL 

Device to use instead of the default MAC address.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.