ZyXEL Communications P-2302HWUDL-P1 Series User Manual

 Chapter 7 LAN

P-2302HWUDL-P1 Series User’s Guide

"

Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer 
on the LAN. To access this screen, click Network > LAN > Static DHCP.

Figure 63   Network > LAN > Static DHCP

Pool Size

Enter the number of IP addresses to allocate. This number must be at least one 

and is limited by a subnet mask of 255.255.255.0 (regardless of the subnet the 

ZyXEL Device is in). For example, if the IP Pool Start Address is 10.10.10.10, 

the ZyXEL Device can allocate up to 10.10.10.254, or 245 IP addresses.

DNS Server

First DNS Server
Second DNS 

Server
Third DNS Server

Specify the IP addresses of a maximum of three DNS servers that the network can 

use. The ZyXEL Device provides these IP addresses to DHCP clients. You can 

specify these IP addresses two ways.
From ISP - provide the DNS servers provided by the ISP on the WAN port.
User Defined - enter a static IP address.
DNS Relay - this setting will relay DNS information from the DNS server obtained 

by the ZyXEL Device.
None -  no DNS service will be provided by the ZyXEL Device.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 50   Network > LAN > DHCP Setup