ZyXEL Communications P-2302HWUDL-P1 Series User Manual

 Chapter 9 SIP

P-2302HWUDL-P1 Series User’s Guide

Use this screen to maintain ToS and VLAN settings for the ZyXEL Device. To access this 
screen, click VoIP > SIP > QoS.

Figure 81   VoIP > SIP > QoS

Enable

Select this if you want to hear a waiting (beeping) dial tone on your phone when 

you have at least one voice message. Your VoIP service provider must support 

this feature.

Expiration Time

Keep the default value, unless your VoIP service provider tells you to change it. 

Enter the number of seconds the SIP server should provide the message waiting 

service each time the ZyXEL Device subscribes to the service. Before this time 

passes, the ZyXEL Device automatically subscribes again.

Call Forward

Call Forward 

Table

Select which call forwarding table you want the ZyXEL Device to use for incoming 

calls. You set up these tables in VoIP > Phone Book > Incoming Call Policy.

Caller Ringing

Enable

Select the check box if you want to specify what tone people hear when they call 

you. The ZyXEL Device provides a default tone, but you can add additional tones 

using IVR. See 

 for more information.

Caller Ringing 

Tone

Select the tone you want people to hear when they call you. You should setup 

these tones using IVR first. See 

 for more information.

On Hold

Enable

Select the check box if you want to specify what tone people hear when you put 

them on hold. The ZyXEL Device provides a default tone, but you can add 

additional tones using IVR. See 

 for more information.

On Hold Tone

Select the tone you want people to hear when you put them on hold. You should 

setup these tones using IVR first. See 

 for more 

information.

<Back

Click this to return to the SIP Settings screen without saving your changes.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 63   VoIP > SIP > SIP Settings > Advanced