ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Chapter 22 System

P-2302HWUDL-P1 Series User’s Guide

Figure 188   Maintenance > System > General

Each field is described in the following table.

Use this screen to set up the ZyXEL Device as a dynamic DNS client. 

Table 112   Maintenance > System > General

System Setup

System Name

Enter your computer's  "Computer Name". This is for identification purposes, but 

some ISPs also check this field. This name can be up to 30 alphanumeric 

characters long. Spaces are not allowed, but dashes “-” and underscores "_" are 

accepted.

Domain Name

Enter the domain name entry that is propagated to DHCP clients on the LAN. If 

you leave this blank, the domain name obtained from the ISP is used. Use up to 

38 alphanumeric characters. Spaces are not allowed, but dashes “-” and periods 

"." are accepted.

Administrator 

Inactivity Timer

Enter the number of minutes a management session can be left idle before the 

session times out. After it times out, you have to log in again. A value of "0" means 

a management session never times out, no matter how long it has been left idle. 

This is not recommended. Long idle timeouts may have security risks. The default 

is five minutes. 

Password Setup

Old Password

Enter the current password you use to access the ZyXEL Device.

New Password

Enter the new password for the ZyXEL Device. You can use up to 30 characters. 

As you type the password, the screen displays an asterisk (*) for each character 

you type.

Retype to Confirm Type the new password again.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.