Q-Logic 6140 User Manual

A – Command Reference
Commands

A-10

FI0154601-00  C

S

Saves and restores the router’s configuration.

Admin session to restore

restore 
save

restore
The fru restore command requires that you first ftp the tar file containing the 

desired configuration to the router. When you issue this command, the system 
prompts you to enter the restore level. You can fully restore the router’s 
configuration (all configuration parameters and LUN mappings) or restore only the 
LUN mappings. The restored configuration does not take effect until the router is 
rebooted.

save
The fru save command creates a tar file containing the router’s persistent data, 
configuration, and LUN mappings. The file is stored in the router’s /var/ftp 

directory. You must then ftp the tar file from the router.

The following example shows the fru restore command:

QRouter  (admin) #> fru restore 

A list of attributes with formatting and current values will follow. 
Enter a new value or simply press the ENTER key to accept the current 
value. If you wish to terminate this process before reaching the end 
of the list press 'q' or 'Q' and the ENTER key to do so.

Type of restore (0=full, 1=mappings only)  [full] 

FRU restore completed.  
Please reboot the system for configuration to take affect.

The following example shows the fru save command:
QRouter  (admin) #> fru save

FRU save completed. Configuration File is QLogic_Router_FRU.bin 
Please use FTP to extract the file out from the System.