Q-Logic 6140 User Manual

Page of 250
FI0154601-00  C
1-1
1
Introduction
This manual describes the features and installation of the QLogic SANbox 6140 
Intelligent Storage Router (iSR-6140), also referred to as the SANbox 6140 router 
or simply router.
Intended Audience
This guide is for users who are responsible for installing, managing, and servicing 
the SANbox 6140 router and the storage area network (SAN) equipment to which 
it is attached.
Related Materials
„
Internet Protocol, Version 6 (IPv6) Specification., RFC2460.
„
Neighbor Discovery for IP Version 6 (IPv6), RFC2461. 
„
IPv6 Stateless Address Autoconfiguration, RFC2462.
„
Internet Control Message Protocol (ICMPv6) for the Internet Protocol 
Version 6 (IPv6) Specification
, RFC2463.
„
Transmission of IPv6 Packets over Ethernet Networks, RFC2464. 
„
iSCSI draft standard deaft-ietf-ips-iSCSI-20
„
Internet engineering task force (IETF): iSCSI Requirements and Design 
Considerations, iSCSI Naming and Discovery, Internet Protocol 
Specification (IPv4)
, RFC793
„
Transmission Control Protocol (TCP) Specification, RFC1122, Requirements 
for Internet Hosts-Communication Layers
„
TCP Extensions for High Performance, RFC1323
„
TCP Congestion Control, RFC2581
„
ANSI SCSI: SCSI-3 Architecture Model (SAM), X3T10/994D/Rev 18, 
SCSI-3 Controller Command Set, X3T10/Project 1047D/Rev 6c. IEEE: 
802.1Q Virtual LAN (VLAN), 802.1p Priority of Service, 802.3x Flow Control, 
802.3ad Link Aggregation
„
SCSI-3 Fibre Channel Protocol (SCSI-FCP), X3.269:1996