Q-Logic 6140 User Manual
A – Command Reference
Commands
Commands
A-42
FI0154601-00 C
S
Show FC Command
Displays Fibre Channel port information for the specified port. If you do not specify
a port, this command displays both ports.
a port, this command displays both ports.
Authority
None
Syntax
show fc [port_num]
Keywords
[port_num]
Identifies the number of the FC port to display.
Identifies the number of the FC port to display.
Examples
The following example shows the show fc command:
QRouter #> show fc 2
FC Port Information
---------------------
FC Port 2
Link Status Up
Current Link Rate 2Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:8b:ef
WWPN 21:00:00:c0:dd:0c:8b:ef
Port ID 00-00-ef
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Loop
Programmed Connection Option Loop Preferred
---------------------
FC Port 2
Link Status Up
Current Link Rate 2Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:0c:8b:ef
WWPN 21:00:00:c0:dd:0c:8b:ef
Port ID 00-00-ef
Firmware Revision No. 3.03.07
Frame Size 2048
Execution Throttle 64
Connection Mode Loop
Programmed Connection Option Loop Preferred