ZyXEL Communications wireless n gigbit router zyxel User Manual

Page of 384
Chapter 8 WAN
NBG-460N User’s Guide
142
This screen displays when you select PPPoE encapsulation.
Figure 101   Network > WAN > Internet Connection: PPPoE Encapsulation
The following table describes the labels in this screen.
Table 49   Network > WAN > Internet Connection: PPPoE Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
The PPP over Ethernet choice is for a dial-up connection using PPPoE. 
The NBG-460N supports PPPoE (Point-to-Point Protocol over Ethernet). 
PPPoE is an IETF Draft standard (RFC 2516) specifying how a personal 
computer (PC) interacts with a broadband modem (i.e. xDSL, cable, 
wireless, etc.) connection. Operationally, PPPoE saves significant effort 
for both the end user and ISP/carrier, as it requires no specific 
configuration of the broadband modem at the customer site. By 
implementing PPPoE directly on the router rather than individual 
computers, the computers on the LAN do not need PPPoE software 
installed, since the router does that part of the task. Further, with NAT, 
all of the LAN's computers will have access.
Service Name
Type the PPPoE service name provided to you. PPPoE uses a service 
name to identify and reach the PPPoE server.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.