ZyXEL Communications wireless n gigbit router zyxel User Manual
Chapter 8 WAN
NBG-460N User’s Guide
145
The following table describes the labels in this screen.
Table 50 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that
enables secure transfer of data from a remote client to a private
server, creating a Virtual Private Network (VPN) using TCP/IP-based
networks. PPTP supports on-demand, multi-protocol, and virtual
private networking over public networks, such as the Internet. The
NBG-460N supports only one PPTP server connection at any given
time.
enables secure transfer of data from a remote client to a private
server, creating a Virtual Private Network (VPN) using TCP/IP-based
networks. PPTP supports on-demand, multi-protocol, and virtual
private networking over public networks, such as the Internet. The
NBG-460N supports only one PPTP server connection at any given
time.
To configure a PPTP client, you must configure the User Name and
Password fields for a PPP connection and the PPTP parameters for
a PPTP connection.
Password fields for a PPP connection and the PPTP parameters for
a PPTP connection.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the User Name above.
Retype to Confirm
Type your password again to make sure that you have entered is
correctly.
correctly.
Nailed-up
Connection
Connection
Select Nailed-Up Connection if you do not want the connection to
time out.
time out.
Idle Timeout
This value specifies the time in seconds that elapses before the
NBG-460N automatically disconnects from the PPTP server.
NBG-460N automatically disconnects from the PPTP server.
PPTP Configuration
Server IP Address
Server IP Address
Type the IP address of the PPTP server.
Connection ID/
Name
Name
Type your identification name for the PPTP server.
Get automatically
from ISP
from ISP
Select this option If your ISP did not assign you a fixed IP address.
This is the default selection.
This is the default selection.
Use Fixed IP
Address
Address
Select this option If the ISP assigned a fixed IP address.
My IP Address
Type the (static) IP address assigned to you by your ISP.
My IP Subnet
Mask
Your NBG-460N will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-460N.
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the NBG-460N.
WAN IP Address Assignment
Get automatically
from ISP
Get automatically
from ISP
Select this option If your ISP did not assign you a fixed IP address.
This is the default selection.
This is the default selection.
Use Fixed IP
Address
Address
Select this option If the ISP assigned a fixed IP address.
My WAN IP
Address
Enter your WAN IP address in this field if you selected Use Fixed IP
Address.
Address.
DNS Servers