ZyXEL Communications wireless n gigbit router zyxel User Manual
Chapter 9 LAN
NBG-460N User’s Guide
150
9.3 What You Need To Know
The LAN parameters of the NBG-460N are preset in the factory with the following
values:
values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives
you explicit DNS server address(es), read the embedded Web Configurator help
regarding what fields need to be configured.
you explicit DNS server address(es), read the embedded Web Configurator help
regarding what fields need to be configured.
9.3.1 IP Pool Setup
The NBG-460N is pre-configured with a pool of 32 IP addresses starting from
192.168.1.33 to 192.168.1.64. This configuration leaves 31 IP addresses
(excluding the NBG-460N itself) in the lower range (192.168.1.2 to 192.168.1.32)
for other server computers, for instance, servers for mail, FTP, TFTP, web, etc.,
that you may have.
192.168.1.33 to 192.168.1.64. This configuration leaves 31 IP addresses
(excluding the NBG-460N itself) in the lower range (192.168.1.2 to 192.168.1.32)
for other server computers, for instance, servers for mail, FTP, TFTP, web, etc.,
that you may have.
for information on IP Address and Subnet Mask.
9.3.2 LAN TCP/IP
The NBG-460N has built-in DHCP server capability that assigns IP addresses and
DNS servers to systems that support DHCP client capability.
DNS servers to systems that support DHCP client capability.
Refer to the
section for information on System DNS
Servers.
9.4 LAN IP Screen
Use this screen to change your basic LAN settings. Click Network > LAN.
Figure 105 Network > LAN > IP