ZyXEL Communications wireless n gigbit router zyxel User Manual

Chapter 18 Remote Management

NBG-460N User’s Guide

You can use Telnet to access the NBG-460N’s command line interface. Specify

 

the 

interface/s from which the NBG-460N can be managed remotely using this service 
and specify a secure client that can manage the NBG-460N.

To change your NBG-460N’s Telnet settings, click Management > Remote 
MGMT > Telnet. The following screen displays. 

Figure 153   Management > Remote MGMT > Telnet 

The following table describes the labels in this screen.

You can use FTP (File Transfer Protocol) to upload and download the NBG-460N’s 
firmware and configuration files. To use this feature, your computer must have an 
FTP client.

Table 84   Management > Remote MGMT > Telnet

Server Port

You may change the server port number for a service if needed, however 
you must use the same port number in order to use that service for 
remote management.

Server Access

Select the interface(s) through which a computer may access the NBG-
460N using this service.

Secured Client 
IP Address

A secured client is a “trusted” computer that is allowed to communicate 
with the NBG-460N using this service. 

Select All to allow any computer to access the NBG-460N using this 
service.

Choose Selected to just allow the computer with the IP address that you 
specify to access the NBG-460N using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.