Kenwood TK-3200 User Manual
22
6
7
1
5
Press the PTT switch within 5 seconds
to save the setting, otherwise the
operation will cancel.
to save the setting, otherwise the
operation will cancel.
A beep will sound.
Repeat steps 3 to 6 to set up another
channel.
Repeat steps 3 to 6 to set up another
channel.
Turn the transceiver power OFF and
then ON again to activate the new
settings.
then ON again to activate the new
settings.
Press the Lock key to increment the
Tone number or the Scan key to
decrement the number, to select the
new tone or code.
Tone number or the Scan key to
decrement the number, to select the
new tone or code.
Tone numbers and their corresponding
tones/ codes are provided in the table
on pages 23 and 24.
Press and hold the Lock or Scan key to
increment/ decrement the QT or DQT
number by 5 at a time.
A voice announcement will inform you of
the currently selected QT or DQT
number.
tones/ codes are provided in the table
on pages 23 and 24.
Press and hold the Lock or Scan key to
increment/ decrement the QT or DQT
number by 5 at a time.
A voice announcement will inform you of
the currently selected QT or DQT
number.
Note: The transceiver will automatically return to normal operation if
no action is performed for 5 seconds.
no action is performed for 5 seconds.
TK-2200/3200 E 01-33-10
04.7.16, 1:44 PM
22