Efficient Networks 107-0001-000 User Manual
Efficient Networks
®
Page 7-41
shdsl save
Saves SHDSL configuration changes across restarts and reboots.
Mgmt Class
Network (R/W)
Input Format
shdsl save
Parameters
None
Response
Command prompt.
shdsl speed
Manages the speed of the SHDSL line.
NOTE:
By default, it is assumed that the router is Customer Premises Equipment (CPE) and
the line speed desired is the maximum allowed by the central office (CO).
the line speed desired is the maximum allowed by the central office (CO).
This command can:
•
Display the current requested speed and actual speed (shdsl speed with no
parameter).
parameter).
•
If the actual speed shown is 0 (zero), the line is down.
•
Manually set the speed (shdsl speed <speed>) (You might request a lower
speed to improve stability.)
speed to improve stability.)
•
Select auto-speed detection (shdsl speed auto). You should then restart the
WAN interface with the command shdsl restart.
WAN interface with the command shdsl restart.
NOTE:
A speed change automatically restarts the G.shdsl WAN interface. To make any
changes persistent, perform a
changes persistent, perform a