Quatech T802.11b/g User Manual
Airborne Control Center
100-8007-141G AirborneDirect™
Ethernet Bridge User's Guide
Page 39
Quatech, Inc. Confidential
DHCP Fallback Subnet
Configures the Subnet Mask used by the DHCP fallback
algorithm.
Default is
algorithm.
Default is
255.255.255.0
DHCP Fallback Gateway
Configures the gateway address used by the DHCP fallback
algorithm.
Default is
algorithm.
Default is
0.0.0.0.
Static IP Address
If you use a static IP, each Bridge must have a unique IP
address. The IP address must adhere to the network’s subnet
mask and fall within the valid range of IP addresses for the
network. The Bridge’s static IP address must contain up to four
octets separated by a period. If Enable DHCP is checked, this
parameter is ignored.
Default is 0.0.0.0.
address. The IP address must adhere to the network’s subnet
mask and fall within the valid range of IP addresses for the
network. The Bridge’s static IP address must contain up to four
octets separated by a period. If Enable DHCP is checked, this
parameter is ignored.
Default is 0.0.0.0.
Subnet Mask
Bridge’s subnet mask, up to four octets separated by a period.
Default is 0.0.0.0.
Default is 0.0.0.0.
Default Gateway/Router IP
Address
Address
Bridge’s LAN IP address, up to four octets separated by a
period.
Default is 0.0.0.0.
period.
Default is 0.0.0.0.
Primary DNS
Sets the primary DNS server address for DNS look-ups. If
DHCP is enabled, the IP address provided by the DHCP
server is used.
Default is 0.0.0.0.
DHCP is enabled, the IP address provided by the DHCP
server is used.
Default is 0.0.0.0.
Secondary DNS
Sets the secondary DNS server address for DNS look-ups
when the primary DNS server is unavailable.
Default is 0.0.0.0.
when the primary DNS server is unavailable.
Default is 0.0.0.0.
Discovery Settings
User Discovery Name
Sets the name_device field, which can be retrieved with the
CLI name_device command.
Default is Device.
CLI name_device command.
Default is Device.