TP-LINK 150Mbps Universal WiFi Range Extender User Manual

 

11 



 

Firmware Version - This field displays the current firmware version of the Range Extender. 



 

Hardware Version - This field displays the current hardware version of the Range Extender. 



 

Connection Status to Existing Network - This part shows you the current information of the 

root wireless network which the device is connecting to.   



 

Main Router/AP WiFi Network Name (SSID)  -  It shows the name of the wireless 

network which your device is connecting to.   



 

Signal - It shows the root wireless network's signal strength that the device has received.   



 

Connection Status - It shows whether your device has been connected to a wireless 

network currently. "

Connected" means the range extender have connected to a wireless 

network, while if it shows "disconnected", you can click "

Connect" to connect.   



 

Wired  -  The following is the information of Wired LAN. You can configure them in the 

Network page.   



 

Range Extender MAC Address - The physical address of the system, as seen from the 

Network -> LAN page.   



 

Range Extender IP Address - The IP address of the wired LAN.   



 

Subnet Mask - The subnet mask associated with IP address.   



 

Wireless  -  These are the current wireless settings or information of the device. You can 

configure them in the 

Wireless -> Wireless Settings page.   



 

Operation Mode - Indicates the mode which the device is working on. "Disable" means 

the wireless radio has been turned off.You can configure it in the 

Settings page.   



 

Range Extender WiFi Network Name (SSID)  -  The Device's wireless network name 

(also called SSID) which your PC or other device can be connected to.   



 

Channel - The current wireless channel in use.   



 

Mode - The current wireless mode which the AP works on.   



 

Channel Width - The bandwidth of the wireless channel.   



 

Wireless Rate - It shows the current wireless rate between the range extender and your 

PC or other devices which are connected to the it.   



 

Traffic Statistics - The system traffic statistics.   



 

Sent (Bytes) - Traffic that counted in bytes has been sent out from wireless.   



 

Sent (Packets) - Traffic that counted in packets has been sent out from wireless.   



 

Received (Bytes) - Traffic that counted in bytes has been received from wireless.   



 

Received (Packets) - Traffic that counted in packets has been received from wireless.   



 

System Up Time - The length of the time since the device was last powered on or reset.   

Click the 

Refresh button to get the latest status and settings of the device.