Extreme networks 4700 User Manual
Hardware Installation
Altitude 4700 Series Access Point Installation Guide
12
If the access point is provided both POE power over the GE1/POE port and
5014000247R supplied AC power concurrently, the access point will source power from
the 5014000247R supply only. Disconnecting AC power from the 5014000247R supply
will cause the access point to reboot before sourcing power from the POE injector.
5014000247R supplied AC power concurrently, the access point will source power from
the 5014000247R supply only. Disconnecting AC power from the 5014000247R supply
will cause the access point to reboot before sourcing power from the POE injector.
Console Cable
A console cable (pictured below) can be used to connect the Altitude 4700 Series Access
Point console port to an RS-232 (DB-9) serial port on a separate computer.
Point console port to an RS-232 (DB-9) serial port on a separate computer.
The pinout for the console cable (RJ-45 to DB9) is shown in the following table.
RJ-45
1
2
3
4,5
6
7
8
DB9
8
6
2
5
3
4
7