Lucent Technologies merlin messaging system User Manual
Programming System Date and Time
You must set the system date and time. These parameters cannot be set independently of each other; both date and
time must be set.
time must be set.
To program the System Date and Time:
Step
Programming Task
Touch-Tone Input
1
2
Select System Parameters
3
Select System Date and Time
4
Choose one of the following:
Enter date
Example: February 26, 2000 = 022600
●
Keep current date
●
[mmddyy]
or
5
Choose one of the following:
Enter time (24-hour clock)
Example: 3:45PM = 1545
●
Keep current time
●
[hhmm]
or
6
Choose one of the following:
Approve
●
Re-enter
(Return to Step 4)
(Return to Step 4)
●
or
Procedures
Programming System Language Mode and System Language
Programming Call Answer Service Operator Extension
Programming General Mailbox Owner(s)
Programming Maximum Extension Length
Programming Call Answer Service Operator Extension
Programming General Mailbox Owner(s)
Programming Maximum Extension Length
Programming System Date and Time
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm6.htm [2/2/2000 2:32:34 PM]