Lucent Technologies merlin messaging system User Manual
Changing Calling Restriction to Allow Outcalling
If
Then
The Outcalling feature is not used
The communications system extensions assigned to MERLIN
Messaging System module voice ports should be Outward
Restricted.
Messaging System module voice ports should be Outward
Restricted.
The Outcalling feature is used
For Release 2 or later, ports to be unrestricted or toll restricted are:
Port 2 only on a 2-port system
●
Port 4 only on a 4-port system
●
Ports 5 and 6 only on a 6-port system
●
Ports 7 and 8 only on a 8-port system
●
Ports 9 and 10 only on a 10-port system
●
Ports 11 and 12 only on a 12-port system
●
For Release 1 and 1.1, ports to be unrestricted or toll restricted are:
Port 2 only on a 2-port system
●
Port 4 only on a 4-port system
●
Port 6 only on a 6-port system
●
Note:
The factory setting for all the MERLIN Messaging System extensions assigned to
the MERLIN Messaging System Calling Group VMI are Outward Restricted.
the MERLIN Messaging System Calling Group VMI are Outward Restricted.
●
Refer to your communications System Planning Form containing Call Restrictions
and Lists information to identify the Outward Restriction status of extensions at
your site
and Lists information to identify the Outward Restriction status of extensions at
your site
●
Procedure
Changing Calling Restriction to Allow Outcalling
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs5a.htm [2/2/2000 2:33:46 PM]