Lucent Technologies merlin messaging system User Manual
Programming a Direct Voice Mail Button
Direct Voice Mail allows an inside caller to call directly or transfer a call directly to another user’s voice
mailbox. It can be programmed at the user’s telephone or through Centralized Telephone Programming.
The Centralized Telephone Programming procedure is documented below.
mailbox. It can be programmed at the user’s telephone or through Centralized Telephone Programming.
The Centralized Telephone Programming procedure is documented below.
To program a Direct Voice Mail button:
Step
Programming Task
Console Input/Selection
PC Input/Selection
1
Enter Programming mode
Sys Program
Exit/Start
[any key]
2
Display next page of menu
/
3
Select Centralized
Telephone Programming
Telephone Programming
Cntr-Prg
4
Select Program Extension
Program Ext
5
Enter the extension you want
to program
to program
[nnn]
Enter
[nnn]
6
Start Centralized Telephone
Programming
Programming
Start
7
Select line/feature button
Press button on console
or
+ function
key, then
8
Select Direct VM feature
or
ListFeature
/
Direct VM
or
Function key corresponding to
Direct VM
Direct VM
9
Return to System
Programming menu
Programming menu
Sys Program
Exit/Back
Exit/Back
Procedures
Programming a Direct Voice Mail Button
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9f.htm [2/2/2000 2:34:00 PM]