Lucent Technologies merlin messaging system User Manual
System LEDs
The MERLIN Messaging System module faceplate contains:
One system status LED
●
One LED for each of the voice ports
●
The color(s) and status (that is, on, off or blinking) of the LEDs provide information regarding the
operation of the MERLIN Messaging System module.
operation of the MERLIN Messaging System module.
The table below provides a description of the port-level and system status LED display variations.
Display Meaning
Port-Level LEDs
Port not available for use (off)
Port in service and idle (on-hook)
Port in use (off-hook)
System Status LED
System is not powered up or there is a fault condition
System is in a ready state (off-hook; speaking or recording; receiving Touch Tones)
There is a self-test failure or system is out-of-service
There is a self-test failure or system is out-of-service
System software is being upgraded
Hard disk is active
System LEDs (Maintenance)
http://www.sostc.com/lucent/ongoingmaintenance/overview/mmgencfg4.htm [2/2/2000 2:34:14 PM]