Sony BKS-R1601 User Manual

5-31

ROUTING SWITCHER SYSTEM (E)

5-2. Setting Items of the Secondary Station

This menu is used to assign source/destination name to
each source/destination button.

1.

Select menu item [N].

2.

Select a button number using the cursor.

3.

When [Enter] is pressed, the panel table can be typed.
To delete the registration, press [Enter] before

inputting the name.

4.

a)

When [J : NAME STYLE (Type 

+ Num)] is

selected in the primary station menu, input the
type name (between 0 and F) and the number for

the source and destination name.

b) Each time Ctrl N is pressed when [J : NAME

STYLE (DESCRIP. NAME)] is selected in the
primary station menu, the following input mode

will be switched alternately.

Description name input mode :

When “Ctrl

_ N : Type + Num” is displayed on the

screen, it means that the name mode will be
changed to “Type 

+ Number” by pressing [Ctrl] _

[N].
Input Description name from the first to seventh

characters using the alphabet and numerical keys.

“Type 

+ Number” name input mode:

Input in the same way as a).

n
If the Description name has been set for the input/output

number, the display of Description has priority to the
display of “Type 

+ Number” even if the “Type + Number”

name is set.

5.

When [Enter] is pressed, the source name is set.

6.

When [Ctrl] 

_ [E] is pressed, the menu screen of the

secondary station will be displayed.
When [Ctrl] 

_ [D] is pressed, the menu screen of the

primary station will be displayed.

SONY ROUTING SYSTEM SETUP MENU    BKS-R3219 V1.00   STATION NUMBER 3

 SET PANEL TABLE(SOURCE)   CONTROL DESTINATION = OUT001

01 KEY=IN001    02 KEY=IN002    03 KEY=IN003    04 KEY=IN004

05 KEY=IN005    06 KEY=IN006    07 KEY=IN007    08 KEY=IN008

09 KEY=.......  10 KEY=.......  11 KEY=.......  12 KEY=.......

13 KEY=.......  14 KEY=.......  15 KEY=.......  16 KEY=.......

17 KEY=IN009    18 KEY=IN010    19 KEY=IN011    20 KEY=IN012

21 KEY=IN013    22 KEY=IN014    23 KEY=IN015    24 KEY=IN016

25 KEY=.......  26 KEY=.......  27 KEY=.......  28 KEY=.......

29 KEY=.......  30 KEY=.......  31 KEY=.......  32 KEY=.......

 SET PANEL TABLE(DESTINATION)

01 KEY=.......  02 KEY=.......  03 KEY=.......  04 KEY=.......

05 KEY=.......  06 KEY=.......  07 KEY=.......  08 KEY=.......

09 KEY=OUT001   10 KEY=OUT002   11 KEY=OUT003   12 KEY=OUT004

13 KEY=OUT005   14 KEY=OUT006   15 KEY=OUT007   16 KEY=OUT008

17 KEY=.......  18 KEY=.......  19 KEY=.......  20 KEY=.......

21 KEY=.......  22 KEY=.......  23 KEY=.......  24 KEY=.......

25 KEY=OUT009   26 KEY=OUT010   27 KEY=OUT011   28 KEY=OUT012

29 KEY=OUT013   30 KEY=OUT014   31 KEY=OUT015   32 KEY=OUT016

0=IN      1=OUT     2=SONY    3=VTR     4=SUP     5=CB      6=AIR     7=ME

8=PGM     9=CL      A=SL      B=L       C=RET     D=MIX     E=JEEP    F=OSC

G=L/A     H=REM     I=CAM     J=STDO    K=AUX     L=COV     M=BS      N=CS

O=SAT     P=CG      Q=WETH    R=TEST    S=HD      T=D1-     U=D2-     V=SEG

 Ctrl-E:MENU  Ctrl-D:RETURN  Ctrl-N:DESCRIP.NAME  T:TAKE M:MONI  V:VTR  E:LEVEL

m
1.

In the BKS-R1617/R1621, each button (key) can be
set to both source and destination. In case source and
destination are set to the same button (key), the DEST

button works as a destination button when the DEST
button lights in amber and the DEST button works as a

source button when the DEST button lights in green.
In the 4 DESTINATION mode, both source and

destination can be set to only buttons (keys) 01 to 04.
Other than setting of source button (key), the destina-

tions of block 1 to 4 can be set to destination buttons
01 to 04.

Be sure to set either source or destination on the
respective buttons (keys) when setting other model.

If both source and destination are set to the same
button (key), it will cause malfunction.

2.

Set the table data of BKS-R3204/R3205/R3206 by
eight buttons previously in the menu item [Z : SET
____ PANEL STATUS].  If “KEY = ____” is
displayed on the key number position, the name can

not be input.

3.

When setting description names to the source/destina-

tion buttons, select a name from the description name
group sent to the remote control unit.

If other names are input, these will not be set even if
the [Enter] button is pressed.

In such cases, transfer the group including the desired
description name from the primary station.