Sony BKS-R1601 User Manual

5-32

ROUTING SWITCHER SYSTEM (E)

5-2. Setting Items of the Secondary Station

This menu is used to assign source name and destination

name to be displayed.

The setting procedure is the same as that of menu item [N :

SET PANEL TABLE] (BKS-R3204).

m
1.

The setting of [SET PANEL TABLE (SOURCE)]

assigns the source name and [SELECT DESTINA-
TION] assigns the destination name.

2.

The destination name can also be assigned using the
button on the front panel.  Refer to the Operation

Manual for setting.

3.

If “Type 

+ number” name mode is selected in the

menu item [Z : SET PANEL STATUS], (refer to the
Operation Manual of BKS-R3206) “SET PANEL

TABLE (SOURCE)” is not displayed.

SONY ROUTING SYSTEM SETUP MENU    BKS-R3206 V3.10 STATION NUMBER 18

 SET PANEL TABLE( SOURCE )

01 KEY=IN001     02 KEY=IN002     03 KEY=IN003     04 KEY=IN004

05 KEY=IN005     06 KEY=IN006     07 KEY=SONY007   08 KEY=SONY008

09 KEY=SONY009   10 KEY=SONY010   11 KEY=IN011     12 KEY=IN012

13 KEY=SONY013   14 KEY=SONY014   15 KEY=SONY015   16 KEY=IN016

 SELECT DESTINATION

01     OUT001    02     OUT002    03     OUT003    04     OUT004

05     OUT005    06     OUT006    07     OUT007    08     OUT008

09     OUT009    10     OUT010    11     OUT011    12     OUT012

13     OUT013    14     OUT014    15     OUT015    16     OUT016

0=IN      1=OUT     2=SONY    3=VTR     4=SUP     5=CB      6=AIR     7=ME

8=PGM     9=CL      A=SL      B=L       C=RET     D=MIX     E=JEEP    F=OSC

G=L/A     H=REM     I=CAM     J=STDO    K=AUX     L=COV     M=BS      N=CS

O=SAT     P=CG      Q=WETH    R=TEST    S=HD      T=D1-     U=D2-     V=SEG

Ctrl-E:MENU      Ctrl-D:RETURN    Ctrl-N:DESCRIP.NAME

4.

When “T : TAKE   M : MONI” is displayed on the
screen, it means that the button on the source side can

be set as the TAKE button or MONI button.
Before pressing [Enter], select a key from the source

side.  To set it as the TAKE button, press [T]; to set it
as the MONITOR button, press [M].

5.

When “V : VTR” is displayed on the screen, it means
that the VTR control function can be assigned to the

buttons on the source side.
Before pressing [Enter], select a key from the source

side and press [V].
Enter the number according to the list of operations on

the bottom of the screen.

6.

When “E : LEVEL” is displayed on the screen, it

means that the level control function can be assigned
to the buttons on the source side.

Before pressing [Enter], select a key from the source
side and press [E].

Enter the number according to the list of levels on the
bottom of the screen.

n
In BKS-R1607 of version V1.10 and higher, any desired
button among the sixteen buttons can be set as a TAKE

button.
When this setting is performed, the name selected by the

SELECTOR knob on the front panel can be taken by
pressing the TAKE button.

(Maximum inputs 512 

x outputs 512)

The actual setting procedure is as follows.  Select a key
from the source side which you want to use as the TAKE

button.  Press the [T] button.

SONY ROUTING SYSTEM SETUP MENU    BKS-R1607 V1.10  STATION NUMBER 12

 SET PANEL TABLE(SOURCE)   CONTROL DESTINATION = OUT244

01 KEY=SRC004    02 KEY=SRC005    03 KEY=SRC006    04 KEY=SRC001

05 KEY=SRC002    06 KEY=SRC003    07 KEY=SRC007    08 KEY=SRC008

09 KEY=SRC009    10 KEY=SRC010    11 KEY=SRC013    12 KEY=SRC014

13 KEY=.......   14 KEY=.......   15 KEY=.......   16 KEY=TAKE

 SET PANEL TABLE(DESTINATION)

01 KEY=.......   02 KEY=.......   03 KEY=.......   04 KEY=.......

05 KEY=.......   06 KEY=.......   07 KEY=.......   08 KEY=.......

09 KEY=.......   10 KEY=.......   11 KEY=.......   12 KEY=.......

13 KEY=OUT001    14 KEY=OUT012    15 KEY=OUT003    16 KEY=.......

0=SRC    1=OUT    2=2     3=3     4=4     5=5     6=6     7=7

8=8      9=9      A=A     B=B     C=C     D=D     E=E     F=F

  Ctrl-E:MENU  Ctrl-D:RETURN  Ctrl-N:DESCRIP.NAME T:TAKE