Sony BKS-R1601 User Manual

3-3

ROUTING SWITCHER SYSTEM (E)

SONY Digital Routing System DVS-V6464B  V2.10  

           ITEM

    ROM CHECK SUM               8A65

    RAM READ AND WRITE          OK

    REFERENCE SIGNAL            OK

    S-BUS LINK TERMINATE        OK

    REAL TIME CLOCK

  STARTED

1993.02.03-22.15 STARTED BY DVS-V6464B Ver2.10 IN STATION 1

1993.02.03-22.15 S-BUS LINK DISCONNECTED TO CHANNEL B

1993.02.03-22.15 MISSING REFERENCE SIGNAL IN STATION 1

1993.02.03-22.15 POWER SUPPLY UNIT B DOWN IN STATION 1

Model

Software version

1990.10.12-15:42  S-BUS LINK DISCONNECTED

1990.10.27-09:28  STARTED BY BKS-R1601 Ver3.10 IN STATION 11

1990.11.03-05:31  STARTED BY BKS-R3204 Ver3.11 IN STATION 32

1991.01.14-13:51  MISSING REFERENCE SIGNAL IN STATION 1

1991.02.01-11:15  POWER SUPPLY UNIT B DOWN IN STATION 4

1991.02.04-06:11  X-POINT ERROR IN STATION 1

3-3. System Status Screen

When the primary station is turned ON, the results of the self-diagnosis and ROM check sum value are
displayed as shown below.

If the result of the self-diagnosis is satisfactory, “OK” will be displayed at the corresponding item.
However if an error has been detected, this item will be the reversal characters.

When a message is output to the S-BUS data link, the system status screen will also show the time and

data of the event along with the message.

If some error or event happens while you open a Menu Screen or a Setting Screen, then the message will

be displayed when you open the system status screen.

The display will change to the menu screen when [Ctrl] 

_ [X] is pressed.

To return to the system status screen, press [Ctrl] 

_ [X] again.

n
When [Ctrl] 

_ [X] is pressed, the menu screen will be opened.

At this time, if the password is required, input the password.