Sony BKS-R1601 User Manual

5-18

ROUTING SWITCHER SYSTEM (E)

5-1. Setting Items of the Primary Station

CHANGE CROSSPOINT

           DVS-V6464B V2.10 STATION NUMBER 1

                                    LEVEL=1

  DEST    SOURCE  DEST    SOURCE   DEST    SOURCE   DEST    SOURCE 

 OUT001 -IN001    OUT002 -IN002    OUT003 -IN003    OUT004 -IN004  

 OUT005 -IN005    OUT006 -IN006    OUT007 -IN007    OUT008 -IN008  

 OUT009 -IN009    OUT010 -IN010    OUT011 -IN011    OUT012 -IN012  

 OUT013 -IN013    OUT014 -IN014    OUT015 -IN015    OUT016 -IN016  

 OUT017 -IN017    OUT018 -IN018    OUT019 -IN019    OUT020 -IN020  

 OUT021 -IN021    OUT022 -IN022    OUT023 -IN023    OUT024 -IN024  

 OUT025 -IN025    OUT026 -IN026    OUT027 -IN027    OUT028 -IN028  

 OUT029 -IN029    OUT030 -IN030    OUT031 -IN031    OUT032 -IN032  

 OUT033 -IN033    OUT034 -IN034    OUT035 -IN035    OUT036 -IN036  

 OUT037 -IN037    OUT038 -IN038    OUT039 -IN039    OUT040 -IN040  

 OUT041 -IN041    OUT042 -IN042    OUT043 -IN043    OUT044 -IN044  

 OUT045 -IN045    OUT046 -IN046    OUT047 -IN047    OUT048 -IN048  

 OUT049 -IN049    OUT050 -IN050    OUT051 -IN051    OUT052 -IN052  

 OUT053 -IN053    OUT054 -IN054    OUT055 -IN055    OUT056 -IN056  

 OUT057 -IN057    OUT058 -IN058    OUT059 -IN059    OUT060 -IN060  

 OUT061 -IN061    OUT062 -IN062    OUT063 -IN063    OUT064 -IN064  

0=IN    1=OUT   2=....  3=....  4=....   5=....   6=....   7=....

8=....  9=....  A=....  B=....  C=....   D=....   E=....   F=GPHA

F1:SEARCH  F2:JUMP  F3:PgUp  F4:PgDn  F5:Level Ctrl-E:RETURN TO MENU

CHANGE PASSWORD                   DVS-V6464B V2.10 STATION NUMBER 1

Please Input New Password  = ________________

*

                                           Ctrl-E:RETURN TO MENU

This menu is used to change the password.

1.

Select menu item [P].

2.

Input the password currently set, and press [Enter].

In the default status, password is not set in DVS-
V3232B/V6464B.

Once the password is set, the menu items can not be
set or changed unless the password is entered.

If a wrong password is input, the demand for password
input will be displayed again.

3.

Enter a new password, and press [Enter].  The new
password is verified again.

4.

After the new password has been confirmed twice, the
screen will return to the menu screen.

5.

If not confirmed, the password is demanded again.

n
If you forget the password, settings cannot be performed

unless the unit is returned to default.
As all table data will be erased when returned to default, be

sure you should not forget the password.

This menu is used to display the crosspoints and change
them.

1.

Select menu item [Q].

2.

Select the item using the cursor.  Change only the
source name.

3.

When [Enter] is pressed, the source name input mode
will be set.  When either key is pressed before entering
the source name, the mode will be canceled and the
previous display will be returned.

4.

Select the code assigned to each type name, and enter
the source name using the numerical keys.

5.

When [Enter] is pressed, the crosspoint will be set.  If
[Ctrl] _ [F] is pressed before the setting, the original
setting will be returned.
When [Ctrl] 

_ [E] is pressed, the menu screen will be

displayed.

m
1.

When the power of the primary station is
turned on, “ · · · · ” will be displayed for a while at the
source name position.  But once the status of the cross-
points is detected, the source name set before hand will
be displayed.

2.

Outputs whose destination names are not assigned will
be displayed with “ · · · · ”, and crosspoint switching
cannot be performed for these.

3.

Moreover, names set with the protect function cannot
be switched either.

4.

When entering the Description name, enter 7 charac-
ters from the head.