Siemens 6500 Series User Manual

6500 Series Residential Gateway User’s Guide

 

Installation

 

 

1)  With your computer off, connect the provided USB cable to 

the USB port on the Gateway. 

2)  Connect the other end of the USB cable to an open USB 

port on your computer. 

3)  If desired, use standard 10/100 CAT5 Ethernet cables to 

connect additional computers to the Ethernet ports on the 
Gateway.  

1)  Connect the DSL cable (resembles a telephone cord) to the DSL port on the Gateway. 

2)  Plug the other end of the DSL cable into the phone jack. 

1)  Connect the power adapter to the rear of the Gateway. 

2)  Plug the power adapter into the electrical wall outlet. 

3)  Flip the power switch to power on the Gateway.  

4)  Power on all connected computers. 

1)  Insert the USB driver CD-ROM into the CD-ROM drive of your computer. 

2)  When prompted, follow the on-screen instructions to complete the driver installation. 

1) The 

DSL, USB, and Power LEDs should be lit. (For more information, refer to the 

 section in 

Chapter 1.) 

You can now configure the TCP/IP settings as detailed in the next chapter. 

When using the USB installation method on a Macintosh, follow these steps to install the USB drivers: 

1. 

Insert the SpeedStream Installation CD into your CD-Rom drive.  

2. 

Open the SpeedStream icon from the desktop.  

3. 

Click Readme.txt to open it. 

4. 

Follow the directions in the Readme.txt file. 

You can now configure the TCP/IP settings as detailed in the next chapter. 

9