Siemens 6500 Series User Manual

6500 Series Residential Gateway User’s Guide

 

Configuring Advanced Features

 

The “TCP/UDP Options” window is displayed if you select TCP or UDP protocol from the “

” window. If you selected either of these protocol types, you must identify the source and 

destination ports. 

 

 

1. 

Select one of the following options from the Source Port Operator drop-down menu and the 
Destination Port Operator drop-down menu: 

•  any  

Any port is acceptable as the source/destination port. 

•  less than or equal to  

A port less than or equal to the numeric value in the Port 1 field is acceptable as the 
source/destination port. Be sure to provide a value in the Port 1 field. 

•  equal to  

A port equal to the numeric value in the Port 1 field is acceptable as the source/destination port. 
Be sure to provide a value in the Port 1 field. 

•  greater than or equal to  

a port greater than or equal to the numeric value in the Port 1 field is acceptable as the 
source/destination port. Be sure to provide a value in the Port 1 field. 

•  range  

Any port between the value of the entry in the Port 1 field and the value in the Port 2 field is 
acceptable as the source/destination port. Be sure to provide a value in the Port 1 and Port 2 
fields. 

2. Optionally, 

select 

Check TCP syn packets if you wish this rule to prevent the blocking of 

synchronization packets for pre-existing sessions. 

3. Click 

Next. 

4. Click 

Finish. 

67