Multi-Tech Systems MT3410ZLX User Manual
41
4 - Troubleshooting
The Modem Connects with Some Modems, but
Not Others
Not Others
C:
The remote modem may not support data
compression or error correction, which might
cause it to take too long to negotiate a link.
compression or error correction, which might
cause it to take too long to negotiate a link.
S:
You might try changing the way the modem
negotiates by using the
negotiates by using the
AT&Qn, ATNn, and
ATS37=n commands. It might be best to start
with
with
AT&Q0N1.
When Dialing Another Modem, You Receive a
‘CONNECT’ Response, but Nothing Else
‘CONNECT’ Response, but Nothing Else
C:
The remote modem may be waiting for you to
type a command.
type a command.
S:
Try to log on to the remote site (press Enter).
S:
Type an AT command, then press Enter.
The Modem Speaker Does Not Make Any Sound
When Connecting to Another Modem
When Connecting to Another Modem
C:
The software may have the speaker disabled.
S:
Change the setting in your software or use the
ATMn command to turn the speaker on.
ATMn command to turn the speaker on.
The Modem Loses the Connection When in Use
C:
The remote modem may have locked up.
S:
Run the Remote Digital Loopback Test (
&T4
command).
C:
The telephone switch may have disconnected
your call.
your call.
C:
Your software may have turned off the DTR
signal.
signal.