Lucent Technologies 7820-0766-004 User Manual
Setup
Console setup
CellPipe™ 20 Series User’s Guide
2-5
Set your communications software to connect with the following settings:
•
Connection—Specify a direct connection from the unit to the computer.
•
Serial port—Specify the serial port on the computer the software is to use.
•
Terminal type—Specify VT100.
•
Duplex—Specify Full. This is the default for most communications software.
•
Bits per second—Specify 9600.
•
Data bits—Specify 8.
•
Parity—Specify None.
•
Stop bits—Specify 1.
•
Flow control—Specify None.
A >> prompt appears when the connection is completed.