ZyXEL Communications P-2602 User Manual

P-2602H(W)(L)-DxA Series User’s Guide

262

Chapter 19 Bandwidth Management

To view the ZyXEL Device’s bandwidth usage, click Advanced > Bandwidth MGMT > 
Monitor. The screen appears as shown. Select an interface from the drop-down list box to 
view the bandwidth usage of its bandwidth rules. The gray section of the bar represents the 
percentage of unused bandwidth and the blue color represents the percentage of bandwidth in 
use.

Figure 139   Bandwidth Management: Monitor 

Source Subnet 

Netmask

Enter the destination subnet mask. This field is N/A if you do not specify a 

Source Address. Refer to the appendix for more information on IP subnetting. A 

blank source port means any source port number.

Source Port

Enter the port number of the source. See 

 for some 

common services and port numbers.

Protocol

Select the protocol (TCP or UDP) or select User defined and enter the protocol 

(service type) number. 0 means any protocol number.

Back

Click Back to go to the previous screen.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 103   Bandwidth Management Rule Configuration (continued)