ZyXEL Communications G-220 v3 User Manual

ZyXEL G-220 v3 User’s Guide

62 

Chapter 4 Wireless Station Mode Configuration

A profile is a set of wireless parameters that you need to connect to a wireless network. With a 
profile activated, each time you start the G-220 v3, it automatically scans for the specific SSID 
and joins that network with the pre-defined wireless security settings. If the specified network 
is not available, the G-220 v3 cannot connect to a network.

If you do not configure and activate a profile, each time you start the G-220 v3, the G-220 v3 
uses the default profile to connect to any available network with security disabled. 

The default profile is a profile that allows you to connect to any SSID without security. 

Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next.

The profile function allows you to save the wireless network settings in this screen, or use one 
of the pre-configured network profiles.

Note: The procedure to configure certain profiles is different in Windows Vista. See 

Section 4.6 “Security Settings in Windows Vista” on page 71 for more 
information.

Back

Click Back to return to the previous screen.

Save

Click Save to save the changes back to the G-220 v3 and display the Link Info 

screen. 

Exit

Click Exit to discard changes and return to the Site Survey screen.

Table 10   Confirm Save Screen