ZyXEL Communications G-220 v3 User Manual

ZyXEL G-220 v3 User’s Guide

Chapter 4 Wireless Station Mode Configuration

65

• If you select the Infrastructure network type in the previous screen, skip to the next step. 

If you select the Ad-Hoc network type in the previous screen, a screen displays as 
follows. Select a channel number and wireless LAN mode

 

and click Next to continue.

Note: To associate to an ad-hoc network, you must use the same channel as the peer 

computer.

Note: At the time of writing the Ad-hoc channel and wireless mode select is not 

available on Windows Vista.

Network Type

Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer 

computer.

Next

Click Next to go to the next screen.

Exit

Click Exit to go back to the previous screen without saving.

Scan Info

This table displays the information of the available wireless networks within the 

transmission range.

,

,

 or

denotes that the wireless device is in infrastructure mode and the wireless 

security is activated.
denotes that the wireless device is in infrastructure mode but the wireless 

security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the wireless 

security is activated.

denotes that the wireless device is in Ad-Hoc mode but the wireless security 

is deactivated.

SSID

This field displays the SSID (Service Set IDentifier) of each AP or peer device.

Scan

Click Scan to search for available wireless devices within transmission range.

Select

Select an available wireless device in the table and click Select to add it to this 

profile.
Whenever you activate this profile, the G-220 v3 associates to the selected 

wireless network only.

Table 12   Station Mode: Profile: Add a New Profile  (continued)