ZyXEL Communications ZyXEL AG-120 User Manual

ZyXEL AG-120 User’s Guide

52

Chapter 4 Wireless Station Mode Configuration

The following table describes the labels in this screen. 

Figure 27   Station Mode: Security Setting: WPA/WPA2 

The following table describes the labels in this screen. 

Table 7   Station Mode: Security Setting: WPA-PSK/WPA2-PSK

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 

a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Pre-Shared Key

Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-

sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal 

characters.

Back

Click Back to go to the Site Survey screen to select and connect to another 

network.

Next

Click Next to confirm your selections and advance to the Confirm New Settings 

screen. Refer to 

. 

Exit

Click Exit to return to the Site Survey screen without saving.

Table 8   Station Mode: Security Setting: WPA/WPA2

Encryption Type

The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are 

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses 

a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to 

 for more information.

Authentication 

Type

The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and 

PEAP.

Login Name

Enter a user name. 
This is the user name that you or an administrator set up on a RADIUS server.