ZyXEL Communications ZyXEL AG-120 User Manual

ZyXEL AG-120 User’s Guide

Chapter 5 Access Point Mode Configuration

69

To set the wireless LAN mode of the AG-120, click the Advanced tab. 

Select 802.11b to allow only IEEE 802.11a compliant WLAN devices to associate with the 
AG-120.

Select 802.11b+g to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to 
associate with the AG-120. The transmission rate of your AG-120 might be reduced. 

Click Save to save the changes back to the AG-120.

Key x (where x is a 

number between 1 

and 4)

Select this option if you want to manually enter the WEP keys.
Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.

Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 

example, 11AA22BB33) for HEX key type
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 

(for example, MyKey) for ASCII key type.

If you select 128 Bits in the WEP field,

Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for 

example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” 

(for example, MyKey12345678) for ASCII key type.

If you select 256 Bits in the WEP field, 

Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for 

example, 

0000111122223333444455556666777788889999AAAABBBBCCCC000011) 

for HEX key type 
or 
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" 

(for example, MyKey111122223333444455556678) for ASCII key type.

Note: The values for the WEP keys must be set up exactly the 

same on all wireless devices in the same wireless LAN.

ASCII WEP keys are case sensitive.

Save

Click Save to save the changes.

Cancel

Click Cancel to discard the changes.

Table 17   Access Point Mode: Configuration  (continued)