IBM 09-0572-000 User Manual
Connecting to the Network
2-9
Connecting to Unshielded Twisted-pair (UTP) Cable
1 Locate the adapter’s RJ-45 port on the backplate, as
Figure 2-6 Attaching the UTP Cable with the RJ-45 Connector
2 Align the RJ-45 plug on the end of the unshielded
twisted-pair cable with the notch on the adapter’s port.
3 Insert the RJ-45 plug into the adapter port.
4 Connect the other end of the cable to a dual access unit
(DAU), a multistation access unit (MAU), or a controlled
access unit (CAU).
access unit (CAU).
Do not daisy-chain token ring adapters or connect them back
to back.
to back.
If you have a NetWare server, proceed to Chapter 3. If you
have any other type of network operating system, proceed to
Chapter 4.
have any other type of network operating system, proceed to
Chapter 4.
4 16
RJ-45 port
RJ-45
connector