Intel FS-979 User Manual

Page of 52
FS-979 User’s Manual                                                Introduction 
Product Specification 
Ethernet Interface 
Chipset Intel® PRO/100 LAN interface with 82562EZ PHY 
Or Marvell® Gigabit LAN interface with E8053 PCIE controller 
82562EZ 
10Base-T / 100Base-TX 
auto-switching Fast Ethernet 
Full duplex, IEEE802.3U compliant   
Type 
E8053 
10Base-T / 100Base-TX/1000Base-T 
auto-switching Gigabit Ethernet 
Full duplex, IEEE802.3U compliant 
Connector 
External RJ45 connectors with LED on rear I/O panel 
Solid State Disk Interface 
Flash Type 
Compact Flash Type-I/II for Compact Flash Card or Micro Drive 
Capacity 
Up to 1GB flash memory 
ISA Interface 
ISA Bridge 
Winbond W83628F & W83629D 
Function 
I/O & IRQ supported only, no support DMA & bus mastering 
Audio Interface 
Chipset Intel® ICH6R with Realtek® ALC201A AC97 3D audio codec 
Interface 
2 channel 3D audio with Line-in, Line-out and MIC-in 
Connector 
Internal header for Line-out, Line-in and MIC-in 
Internal CD audio connector 
Power and Environment 
Power 
Requirement 
Standard AT 4-pin power supply   
Additional +12V 4-pin power connector 
3-pin ATX function connector 
Dimension 
338 (L) x 122 (H) mm 
Temperature 
Operating within 0 ~ 60
o
C (32 ~ 140
o
F) 
Storage within -20 ~ 85
o
C (-4 ~ 185
o
F) 
Ordering Code 
FS-979VDL 
Full-size Intel® Pentium 4 PICMG single board computer with 
LGA775, DDR2, AC97 Audio, CF, USB2.0, DVI, 10/100Mbps LAN 
FS-979VDG3 
Same with above but with 3 x Gigabit LAN 
The specifications may be different as the actual board. 
For further product information please visit the website at