AirLink CDMA/1x User Manual
54
FIGURE 1.
Wireless ACE: Using AT Commands
To set or commit the changes in the modem, use the Write button at the top of
Wireless ACE interface.
Wireless ACE interface.
FIGURE 2.
Wireless ACE: Toolbar
For more information on using Wireless ACE 3G or Wireless ACE Web, please
refer to the Wireless ACE 3G User Guide.
refer to the Wireless ACE 3G User Guide.
Using Telnet Terminal Emulation
It is possible to communicate with the
Raven
across a TCP/IP network. Telnet pro-
vides a terminal style connection to the Raven.
Most installations of Microsoft Windows come with a version of HyperTerminal
(used here for specific directions), but you can use any other Telnet application,
such as Putty.
(used here for specific directions), but you can use any other Telnet application,
such as Putty.
Note:
Some of the AT Commands are not able to be configured
in Wireless ACE 3G.
With Wireless ACE, you can create a template from one modem and
then use that template to configure other modems in the exact same
way. You can use a in AceNet, too, to configure several modems the
same all at once.
then use that template to configure other modems in the exact same
way. You can use a in AceNet, too, to configure several modems the
same all at once.