Adaptec 39106 User Manual
18
Adaptec SCSI Card 39160 User’s Reference
Starting SCSI
Select
Follow these steps to start SCSISelect:
1
Turn on or restart your system.
During the startup process, pay careful attention to the mes-
sages that appear on your screen.
sages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A
Ctrl-A
keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3
Select SCSI Channel A or B. Most SCSISelect options can be set
separately for each SCSI channel.
separately for each SCSI channel.
4
From the menu that appears, use the arrow keys to move the
cursor to the option you want to select, then press Enter.
cursor to the option you want to select, then press Enter.
Note:
If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This feature
may not work on some monitors.)
may not work on some monitors.)
Exiting SCSI
Select
Follow these steps to exit SCSISelect:
1
Press Esc until a message prompts you to exit (if you changed
any settings, you are prompted to save the changes before you
exit).
any settings, you are prompted to save the changes before you
exit).
2
At the prompt, select Yes to exit, then press any key to reboot
the computer. Any changes you made in SCSISelect take effect
after the computer boots.
the computer. Any changes you made in SCSISelect take effect
after the computer boots.