Adaptec 39106 User Manual

Configuring the Adaptec SCSI Card 39160 with SCSISelect

■

BIOS Multiple LUN Support

—(Default: No) Leave this set-

ting at No if the device does not have multiple Logical Unit
Numbers (LUNs). When set to Yes, the SCSI card BIOS pro-
vides boot support for a SCSI device with multiple LUNs (for
example, a CD “juke box” device in which multiple CDs can be
accessed simultaneously).

■

Include in BIOS Scan

—(Default: Yes) When set to Yes, the

SCSI card BIOS includes the device as part of its BIOS scan at
bootup.

Advanced Configuration Options

Note:

Do not change the Advanced Configuration Options

unless absolutely necessary.

■

Reset SCSI Bus at IC Initialization

—(Default: Enabled) When

set to Enabled, the SCSI card generates a SCSI bus reset during
its power-on initialization and after a hard reset.

■

Display <Ctrl> <A> Messages during BIOS Initialization

—

(Default: Enabled) When set to Enabled, the SCSI card BIOS
displays the

Press <Ctrl> <A> for SCSISelect (TM) Utility!

mes-

sage on your screen during system bootup. If this setting is dis-
abled, you can still invoke the SCSISelect Utility by pressing
<Ctrl> <A>

after the SCSI card BIOS banner appears. If you

change this setting, the change automatically applies to both
SCSI channels.

■

Extended BIOS Translation for DOS Drives > 1 GByte

—

(Default: Enabled) When set to Enabled, provides an extended
translation scheme for SCSI hard disks with capacities greater
than 1 GByte. This setting is necessary only for MS-DOS 5.0 or
above; it is not required for other operating systems, such as
NetWare or UNIX.

Caution:

Changing the translation scheme destroys all

data on the drive. Be sure to back up your disk drives
before changing the translation scheme.