ZyXEL Communications 4.04 User Manual
ZyWALL (ZyNOS) CLI Reference Guide
149
C
H A P T E R
2 0
PPTP Commands
Use these commands to configure PPTP settings on the ZyWALL.
20.1 Command Summary
A remote node is the remote gateway (and the network behind the remote gateway) across a
WAN connection. Remote node 1 may be your ISP for example. You may configure multiple
remote nodes in products with SMT menus or those with multiple WAN ports. In products
without SMT menus or multiple WAN ports, a remote node is the ISP you configured in the
web configurator.
WAN connection. Remote node 1 may be your ISP for example. You may configure multiple
remote nodes in products with SMT menus or those with multiple WAN ports. In products
without SMT menus or multiple WAN ports, a remote node is the ISP you configured in the
web configurator.
The following section lists the commands for this feature.
The following table shows a list of default values
.
Table 69 pptp Command Summary
COMMAND
DESCRIPTION
M
pptp debug [ON|OFF]
Activates/deactivates the PPTP debug flag.
H+
R
R
pptp dial <
remote-
node-name>
Initiates a PPTP tunnel to the specified remote node.
R
pptp drop <remote-node-
name>
Drops a PPTP tunnel to the specified remote node.
R
pptp tunnel <tunnel-id>
Displays the status of the specified PPTP tunnel. The status is either active
or not active.
or not active.
tunnel-id:
Options are 1 or 2.
R
pptp enque [size]
This command is used for flow control. It limits the number of packets
queued for transmission to the number you enter here. Extra packets are
dropped.
queued for transmission to the number you enter here. Extra packets are
dropped.
size:
Enter a number between 1 and 2147483647.
R
pptp chapv1LM [on|off]
Activates or deactivates MS CHAP v1 LAN Manager Authentication. This
procedure authenticates a user when connecting to an ISP.
procedure authenticates a user when connecting to an ISP.
R
Table 70 pptp Default Values
VARIABLE
DEFAULT VALUE
chapv1LM [on|off]
off
enque size
10