ZyXEL Communications 4.04 User Manual
Chapter 21 System Commands
ZyWALL (ZyNOS) CLI Reference Guide
162
21.10.3 Other System Commands
The following section lists miscellaneous system commands.
Table 80 Other sys Commands
COMMAND
DESCRIPTION
M
sys atsh
Displays system information.
R+B
sys baud <1~5>
Sets the console port speed. 1: 38400 bps, 2: 19200 bps, 3:
9600, 4: 57600, 5: 115200.
9600, 4: 57600, 5: 115200.
R+B
sys callhist display
Displays the call history.
R
sys callhist remove <index>
Removes an entry from the call history.
R
sys countrycode [countrycode]
Sets or displays the country code. See
for the country codes.
R+B
sys cpu display
Displays the CPU utilization.
R+B
sys ddns debug <0:off|1:on>
Enables or disables the DDNS debug service.
R+B
sys ddns display <index>
Displays DDNS information for the specified entry.
R+B
sys ddns restart <interface>
Updates DDNS on the specified interface.
R+B
sys domainname [domain-name]
Sets or displays the domain name.
R+B
sys edit <filename>
Edits the system preset text files such as autoexec.net.
R+B
sys feature
Displays information on available features.
R+B
sys filter netbios config <0~10>
<on|off>
NetBIOS (Network Basic Input/Output System) are TCP or
UDP broadcast packets that enable a computer to connect to
and communicate with a LAN. For some dial-up services such
as PPPoE or PPTP, NetBIOS packets can cause unwanted
calls. Use this command to turn the NetBIOS filter on or off for
the specified traffic.
UDP broadcast packets that enable a computer to connect to
and communicate with a LAN. For some dial-up services such
as PPPoE or PPTP, NetBIOS packets can cause unwanted
calls. Use this command to turn the NetBIOS filter on or off for
the specified traffic.
0
: Between LAN and WAN1
1
: Between LAN and DMZ
2
: Between WAN1 and DMZ
3
: IPSec pass through
4
: Trigger Dial
5
: Between LAN and WLAN
6
: Between WAN1 and WLAN
7
: Between DMZ and WLAN
8
: Between WAN2 and LAN
9
: Between WAN2 and DMZ
10
: Between WAN2 and WLAN
Use on to block NetBIOS traffic flowing in the specified
direction or off to allow it.
direction or off to allow it.
R+B
sys filter netbios disp
Displays the NetBIOS filter status.
R+B
sys firewall
for details on the these
commands.
R+B
sys hostname [hostname]
Sets or displays the system hostname.
R+B
sys md5 <string>
Hashes the string using MD5. The maximum length of the
string is 64.
string is 64.
R+B
sys mode [router|bridge|zero]
Sets the ZyWALL to router, bridge, or zero configuration mode
(zero configuration mode applies to the ZyWALL P1).
(zero configuration mode applies to the ZyWALL P1).
R+B
sys myZyxelCom
for details on these commands.
R
sys probeType [icmp | arp]
Sets the DHCP server probing type.
R+B