ZyXEL Communications 4.04 User Manual

 Chapter 22 Wireless Commands

ZyWALL (ZyNOS) CLI Reference Guide

The following section lists the commands dealing with security profiles. The ZyWALL 
supports multiple security profiles. Only one security profile is active at one time.

This example shows how to configure, save and display the settings of a wireless security 
profile. This example uses the following settings.

Table 84   Wireless Security Profile Commands

wcfg security <1-8> name <name>

Sets the security profile name.

R+B

wcfg security <1-8> mode 

<none|wep|8021x-only|8021x-

static64|8021x-

static128|wpa|wpapsk|wpa2|wpa2mix|wp

a2psk|wpa2pskmix>

Sets the security mode for the specified security 
profile.

R+B

wcfg security <1-8> wep keysize 

[64|128|152] [ascii|hex]

Sets the WEP key length (in bits) and encoding 
method of WEP encryption for the specified security 
profile.

ascii|hex

: ASCII mode or Hex mode.

R+B

wcfg security <1-8> wep auth 

[shared|auto]

Sets the WEP authentication method for the 
specified security profile.

R+B

wcfg security <1-8> wep key1 <key>

Sets the WEP key1 for the specified security profile. 
Each security profile can use up to four keys.

: Refer to 

R+B

wcfg security <1-8> wep key2 <key>

Sets the WEP key2 for the specified security profile.

: Refer to 

R+B

wcfg security <1-8> wep key3 <key>

Sets the WEP key3 for the specified security profile.

: Refer to 

R+B

wcfg security <1-8> wep key4 <key>

Sets the WEP key4 for the specified security profile.

: Refer to 

R+B

wcfg security <1-8> wep keyindex <1-

4>

Activates one of the four WEP keys to encrypt 
wireless data transmission.

R+B

wcfg security <1-8> reauthtime 

<value>

Sets the time interval for wireless re-authentication 
for the specified security profile.

R+B

wcfg security <1-8> idletime <value>

Sets the idle time before a forced de-association.

R+B

wcfg security <1-8> groupkeytime 

<value>

Sets the time interval for the WPA or WPA2 group 
key update.

: 600~65535 seconds.

R+B

wcfg security <1-8> passphrase 

<value>

Sets the passphrase when you selected security 
mode using wpapsk, wpa2psk, or wpa2pskmix. 

: 8~63 alphanumeric characters.

R+B

wcfg security <1-8> clear

Sets the specified profile to its default value.

R+B

wcfg security <1-8> save

Saves the specified profile’s configuration.

R+B

wcfg security <1-8> show

Displays the specified profile’s configuration.

R+B

wcfg security display

Displays all runtime security profile settings.

R+B

wcfg security saveall

Saves all runtime wireless security settings to the 
non-volatile memory.

R+B