ZyXEL Communications 4.04 User Manual
ZyWALL (ZyNOS) CLI Reference Guide
43
C
H A P T E R
6
Bandwidth Management
Commands
Use these commands to configure bandwidth management (BWM) settings on the ZyWALL.
6.1 Command Summary
The following table describes the values required for many commands. Other values are
discussed with the corresponding commands.
discussed with the corresponding commands.
Table 19 Bm Class Command Input Values
LABEL
DESCRIPTION
<interface>
This is an interface name including lan, wan/wan1, dmz, wan2, wlan.
name <class-
name>
This is a class name. Enter a descriptive name of up to 20 alphanumeric
characters, including spaces.
characters, including spaces.
class-number
This is a class number. Each class for each interface has an unique number.
The number format is "xx.xx.xx.xx...xx" and the range of xx is from 01 to 98.
Each ".xx” is a subclass. And the length of "xx.xx.xx.xx..." is the depth of this
class. Different model supports different class depth.
The number format is "xx.xx.xx.xx...xx" and the range of xx is from 01 to 98.
Each ".xx” is a subclass. And the length of "xx.xx.xx.xx..." is the depth of this
class. Different model supports different class depth.