ZyXEL Communications 4.04 User Manual

ZyWALL (ZyNOS) CLI Reference Guide

Use these commands to configure your configuration settings on the ZyWALL. Many of these 
commands are also available in the web configurator.

The following table describes the values required for many config commands. Other values 
are discussed with the corresponding commands.

Table 26   config Command Input Values

Specifies which day. Options are 
sunday|monday|tuesday|wednesday|thursday|friday|saturday.

Specifies which custom service (from 1~100). A custom service allows you to 
configure a port for specific applications such as P2P applications. The available 
sub-fields are:
   name <string>
   range <start-port><end-port>
   ip-protocol <icmp|tcp|udp|tcp/udp|user-defined>
   user-defined-ip <1~255>
   icmp-type <0~255>
   icmp-code <0~255>

Describes a subnet mask in dotted decimal notation.

A non-zero number used to indicate a black or white filter rule is enabled.

Specifies which rule from in a set. A rule is used to describe an action to be 
taken when a packet matches the rule description. The number of rules 
available depends on the product.
See 

 for a detailed description of the parameters.

Specifies the action to take when a rule applies to a packet. The options are 
permit|drop|reject.

Specifies when to send an e-mail. Options are full|hourly|daily|weekly|none.

Specifies which set. A set is a named set of rules and actions applying to 
packets with a specified source and destination interface. Set numbers go from 
1~255. See 

 for a detailed description of the 

parameters.