Motorola 3460 User Manual
3460 Fast’R
5-10
Running Diagnostic Tests
This section describes loopback, busy out, and retrain tests, which
analyze local- and remote-modem performance and the telephone line to
assist you in isolating network problems. These tests can be initiated:
analyze local- and remote-modem performance and the telephone line to
assist you in isolating network problems. These tests can be initiated:
• With AT commands from an attached PC or terminal
• With commands from Fast’RVu
• With commands from a Motorola network management system
IMPORTANT: Run one test at a time. Tests interrupt network data.
Table 5-3. Running Diagnostic Tests
Test
Description
AT
Command
Local Analog
Loopback (LAL)
Loopback (LAL)
Tests local-modem transmit and receive
circuitry
circuitry
AT&T1
LAL
Pattern Tests
local-modem
circuits
AT&T8
Remote Digital
Loopback (RDL)
Loopback (RDL)
Tests local- and remote-modem circuits
and the telephone line
and the telephone line
AT&T6
Local Digital
Loopback (LDL)
Loopback (LDL)
Tests local-modem telephone lines and
circuits.
circuits.
AT&T7
Busy Out
Lets the modem appear busy to
incoming calls.
incoming calls.
ATH1
Retrain
Lets you manually retrain the local and
remote modems
remote modems
ATO1
Terminate
Terminates a test in progress
AT&T0
LAL, LDL, and RDL tests using the EIA leads are not supported.
Parameters and options shown shaded gray vary by country. For your
country’s options, refer to the 3460 Fast’R Reference Guide.
country’s options, refer to the 3460 Fast’R Reference Guide.