MAXTECH NX-16 User Manual

Contents

Section One -

Introduction ......................... 1

Section Two -

Installation ........................... 2

Section Three - Driver Installation .............. 7

Section Four -

Troubleshooting .................. 7

Section Five -

Cable Information .............. 9

Section Six -

Specifications ..................... 10

Section Seven - Technical Support ............. 11

Section Eight - Warranty, FCC And Other

Information ........................ 12

Section One - Introduction

Maxtech’s NX-16 Series network adapt-

ers are high performance, software configurable
Ethernet network adapters. Software configura-
tion provides many advantages over conventional
hardware configured products, including ease of
installation, auto-configuration, and convenient
re-configuration. There is no need to set numerous
and unfamiliar jumpers when installing or re-
configuring the network card. The included setup
program can either automatically select valid I/O
and IRQ addresses when a conflict is detected, or
custom-configure the adapter using parameters of
your choice.

The NX-16 Series network adapter cards

are Industry Standard Architecture (ISA) compat-
ible products and can be used in any IBM PC/XT/AT
or other fully compatible computer. The adapters are
NE-2000 compatible and include a 16KB RAM
buffer for faster network transmission and reception.