Lantronix 1-T2 User Manual
Configuration
Introduction
1 - 4
When using IPX or LAT, it is possible to power up the MSS and have it work
properly with no additional conÞguration required. TCP/IP users must give
the unit an IP address.
properly with no additional conÞguration required. TCP/IP users must give
the unit an IP address.
NOTE:
For more information about methods used to configure an IP
address, see IP Address Configuration in.
address, see IP Address Configuration in.
Lantronix has provided EZWebCon software to help users install and
conÞgure the MSS. It is also possible to conÞgure the MSS settings by logging
into it over a network via Telnet or Rlogin. See the
conÞgure the MSS. It is also possible to conÞgure the MSS settings by logging
into it over a network via Telnet or Rlogin. See the
chapter
for
more information.
Additionally, the MSS can be conÞgured to download a conÞguration Þle
containing boot commands from a NetWare or TCP/IP host at boot time. See
the
containing boot commands from a NetWare or TCP/IP host at boot time. See
the
MSS Reference Manual
on the CD-ROM
for more information.